All-Season Concrete Form Oil
Performance Specifications
BOSS Concrete Form Oil is formulated to impart a seperation film to all types of concrete forms. This non-staining material consists of a light mineral oil which is combined with a chemical agent to allow better than average cling tendencies to forms.
The combination physically repels both water and concrete and is designed to be non-toxic and does not require a WHMIS label.
| SPECIFIC GRAVITY @ 15.5°C | 0.8406 |
| KINEMATIC VISCOSITY cSt @ 40°C | 4.97 |
| KINEMATIC VISCOSITY cSt @ 100°C | 1.75 |
| VISCOSITY INDEX | 98 |
| FLASH POINT, °C | 45 |
| POUR POINT, °C | -30 |
APPLICATIONS
FOR APPLICATIONS TO FORMS PRIOR TO CONCRETE PLACEMENT TO FACILITATE FORM REMOVAL CONCRETE SET.
THE APPLICATOR SHOULD AVOID PUDDLES, RUNS AND EXCESSIVE SPRAY DRIFT.
IT IS READY TO USE BUT CAN BE DILUTED WITH MINERAL SPIRITS OR ALIPHATIC SOLVENTS FOR åSPRAY APPLICATION CONTROL.
CAN BE STORED AND APPLIED AT BELOW FREEZING TEMPERATURES WHEN NEEDED.
CAN BE USED ON FORMS THAT HAVE BEEN PREVIOUSLY TREATED WITH FORM OIL.
In order to continue to provide superior quality, BOSS LUBRICANTS reserves the right to change composition of its products without notice.
For the location of the Distributor nearest you, please call 1-800-844-9457. BOSS LUBRICANTS #112, 6303 - 30th St SE Calgary AB T2C 1R4