Full Synthetic Automotive Engine Oils
Performance Specifications
These Synthetic engine oils has been formulated to meet the latest car manufacturer's warranty requirements and designed to meet the demands of small displacement, high RPM fuel efficient engines found in today's domestic and foreign automobiles.
A formulation of high quality synthetics and specialized additives provide maximum protection against high temprature oxidation, wear, rust, corrosion, viscosity breakdown while keeping your engine exceptionally clean and free of sludge and varnish.
It also helps protect against the increasing impact of low-speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (GDI).
SAE GRADE |
0W8 |
0W16 |
0W20 |
5W20 |
5W30 |
10W30 |
| Viscosity Index | 144 | 164 | 169 | 161 | 169 | 146 |
| Viscosity @ 100 ◦C, cSt | 5.2 | 7.4 | 8.6 | 8.8 | 10.5 | 10.7 |
| Viscosity @ 40 ◦C, cSt | 25 | 38.3 | 46.6 | 48.9 | 62.9 | 67.8 |
| SPECIFIC GRAVITY | -- | -- | 0.846 | 0.850 | 0.850 | 0.850 |
| Pour Point, ◦C | -39 | -47 | -51 | -48 | -48 | -40 |
| Flash Point, COC, °C, min | -- | 200 | 210 | 208 | 208 | 204 |
| COLOR | -- | -- | 3.0 | 3.0 | 3.0 | 3.0 |
| TOTAL BASE NUMBER, mgKOH/g | -- | -- | 7.4 | 7.5 | 7.5 | 7.7 |
| SULFATED ASH, wt% | -- | -- | 0.92 | 0.92 | 0.92 | 0.92 |
| DENSITY @ 15°C kg/m3 | 0.844 | -- | -- | -- | -- | -- |
| CCS P @ °C | <5200 @ -3 | -- | -- | -- | -- | -- |
| PHOSPHOROUS ppm | 655 | -- | -- | -- | -- | -- |
| ZOACK % los | <15.0 | -- | -- | -- | -- | -- |
*NOTE: Values shown above are representative of current production and may vary within modest ranges.
PROPERTIES
Effective detergent-dispersants WSS keep engine parts clean.
High TBN/alkaline reserve effectively neutralizes combustion formed corrosive acids to protect turbo bearings and other.
ANTI-wear agents effectively protect cam loves and other highly loaded parts from wear.
CHECK BOSS LUBE ADVISOR FOR PROPER OIL RECOMMENDATIONS
Meets and exceeds the U.S. car maker warranty requirements.
High oxidation stability protects engine from oil thickening, high temperature sludge and varnish deposits.
Shear stable viscosity index improves and protects against viscosity breakdown in severe service conditions.
In order to continue to provide superior quality, BOSS LUBRICANTS reserves the right to change composition of its products without notice.
For the location of the Distributor nearest you, please call 1-800-844-9457. BOSS LUBRICANTS #112, 6303 - 30th St SE Calgary AB T2C 1R4