Platinum Antifreeze (Clear)
(color dye kits available upon request)
Performance Specifications
Platinum antifreeze is a heavy duty antifreeze/coolant that contains a proprietary poly-organic/multi-organic acid technology (POAT/MOAT) inhibitor system that does not contain any phosphate, silicate, borate, nitrate or nitrite. It provides superior corrosion protection and total cooling system protection for 600,000 on road miles without the use of any additive containing coolant filters or supplemental coolant additives (SCAs).
The addition of an extender at 300,000 miles is the only maintenance required, although it is recommended that a sample be tested quarterly to detect any problems.
Platinum antifreeze has low reactivity which makes it less sensitive to contaminants such as motor oil, hard water compounds and other coolants. It can be mixed with other coolants in any proportion without adverse effects on corrosion protection.
| CHARACTERISTIC | SPECIFICATION | COMPANY TYPICAL |
| CHLORIDE | 25 PPM, MAX | 2 |
| SPECIFIC GRAVITY, 60/60°F | 1.110–1.145 | 1.12 |
| BOILING POINT, UNDILUTED | 325°F / 162°C MIN | 328 |
| BOILING POINT, 50%V/V | 226°F / 107°C MIN | 230 |
| FREEZING POINT, 50%V/V | -34°F / -36°C MIN | -36 |
| EFFECT ON ENGINE / VEHICLE FINISH | NO EFFECT | PASS |
| ASH CONTENT, MASS% | 2.5 MAX | 2 |
| PH, 50% V/V | 8.0-9.0 | 7.5-9.0 |
| RESERVE ALKALINITY* | NONE SPECIFIED | 8 |
| WATER MASS % | NONE SPECIFIED | 2.8 MAX |
| COLOR | DISTINCTIVE | VARIOUS COLORS |
| EFFECT ON NON METALS | NO ADVERSE EFFECT | PASS |
| STORAGE STABILITY | NONE SPECIFIED | > 1 YEAR |
| FOAMING | SEC BREAK MAX | PASS |
*Reserve alkalinity (RA) is a value agreed between the customer and supplier. The RA listed above is the typical for the additive package being used.
PHYSICAL PROPERTIES
| ANTIFREEZE GLYCOLS | MASS% | 95 |
| WATER and CORROSION INHIBITORS | MASS% | 5 |
| FLASH POINT | °F | 162°C / 323.6°F |
| WEIGHT PER GALLON @ 60°F (-16°C) | LBS | 9.17-9.37 |
| SILICATES | MASS% | NIL |
MIXING TABLE
%AGE ANTIFREEZE |
FREEZE POINT, °C |
BOILING POINT, °C |
| 40 | -22 | 104 |
| 50 | -36 | 107 |
| 70 | -64 | 115 |
MEETS OR EXCEEDS THE FOLLOWING SPECIFICATIONS:
Automotive and Light Duty (ASTM D3306)
Heavy Duty/Low Silicate (ASTM D4985)
Fully Formulated and Precharged (ASTM D6210)
TMC of ATA RP 329/330*
*—The Maintenance Council of the American Trucking Assoc. Antifreeze also meets the nonphosphate requirements of European OEMs and non-silicate requirements of Japanese OEMs.
NOTE: Used antifreeze coolant in most states is not hazardous unless it contains more than 5 ppm of lead. We recommend that spent coolant never be disposed of by dumping into a storm sewer or onto the ground. Instead, contact your local municipality for instructions on where to and how to properly dispose of this coolant and protect our environment
In order to continue to provide superior quality, BOSS LUBRICANTS reserves the right to change composition of its products without notice.
For the location of the Distributor nearest you, please call 1-800-844-9457. BOSS LUBRICANTS #112, 6303 - 30th St SE Calgary AB T2C 1R4