Synthetic Blend Automotive Engine Oils

Performance Specifications

This engine oil is formulated for turbo charged, naturally aspirated gasoline, natural gas and propane engines in passenger vehicles and light duty service trucks. It lubricates, cools and protects high revving turbo charged engines that operate at high temperatures.

This formulation helps protect engines by controlling varnish deposits, rust, and corrosion wear. It also helps protect against the increasing impact of low-speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (GDI).

SAE GRADE

0W20

5W20

5W30

10W30
DENSITY (D4052) KG/M @ 15°C N/A N/A N/A N/A
KINEMATIC VISCOSITY (D445) cSt @ 40°C 46.2 50 61.7 67.2
KINEMATIC VISCOSITY (D445) cSt @ 100°C 8.4 8.7 10.5 10.5
VISCOSITY INDEX (D2270) 160 151 159 145
CCS VISCOSITY (D2602) 341 341 N/A N/A
CCS VISCOSITY (D2602) CP @ -35°C 5900 N/A N/A N/A
CCS VISCOSITY (D2602) CP @ -30°C N/A 6000 6300 N/A
CCS VISCOSITY (D2602) CP @ -25°C N/A N/A N/A 6100
FLASH POINT (D92), °C 228 218 224 236
POUR POINT (D97), °C -44 -40 -40 -37
COLOUR (ASTM) 3 3 3 3
ASH SULPHATE, MASS% 0.92 0.92 0.92 0.92
TOTAL BASE NUMBER, mgKOH/g 7.7 7.8 7.9 7.6

*NOTE: Values shown above are representative of current production and may vary within modest ranges.

 

MEETS OR EXCEEDS THE FOLLOWING API SERVICE AND OEM SPECIFICATIONS REQUIREMENTS:

  • Recommended Passenger Vehicles, Light Duty Pick Ups, Motor Cycles and other gasoline engines.

  • Exceeds API service classification SP

  • GF-7

  • Meets and exceeds the requirements for GM 6094M, Chrysler MS-6395 N, Chrysler MS-10797 (5W20 only), Ford WSS-M2C 929-A, WSS-M2C 9306-A, WSS-MSS-M26946-A.

  • Recommended for domestic and foreign high performance engines, especially small high RPM and turbo charged.

  • Meets or exceeds General Motors requiring DEXOS I

  • Meets or exceeds General Motors DEXOS GEN III specifications (all grades except 10W30)

  • N.B.: Not recommended for heavy duty critical truck engines.

  • CHECK BOSS LUBE ADVISOR FOR PROPER OIL RECOMMENDATIONS.

In order to continue to provide superior quality, BOSS LUBRICANTS reserves the right to change composition of its products without notice.

For the location of the Distributor nearest you, please call 1-800-844-9457. BOSS LUBRICANTS #112, 6303 - 30th St SE Calgary AB T2C 1R4

 
Print Specs (all grades)
Print SDS