Synthetic Industrial Gear Lubes (IGL)
Performance Specifications
These synthetic gear oils are formulated with polyalphaolefin base oils and specifically selected additives for use in a vast range of enclosed gearing systems as well as plain and rolling element bearings. Extreme pressure additives provide maximum load carrying capacities and minimize gear wear, high temperature sludge, oxidation resistance, rust and corrosion protection.
SAE GRADE |
150 |
220 |
320 |
460 |
| API GRAVITY | 33.61 | 32.46 | 31.14 | 30.4 |
| KINEMATIC VISCOSITY (D445) cSt @ 40°C | 150 | 220 | 320 | 460 |
| KINEMATIC VISCOSITY (D445) cSt @ 100°C | 19.6 | 26 | 34.2 | 44.3 |
| VISCOSITY INDEX (D2270) | 150 | 150 | 155 | 155 |
| FLASH POINT (D92), °C | 230 | 230 | 240 | 240 |
| POUR POINT (D97), °C | -45 | -40 | -30 | -30 |
*NOTE: VALUES SHOWN ABOVE ARE REPRESENTATIVE OF CURRENT PRODUCTION AND MAY VARY WITHIN MODEST RANGES
MEETS OR EXCEEDS THE FOLLOWING SERVICE REQUIREMENTS:
AGMA/ANSI: 9005-D94 EP, 9005-E02 EP (ALL GRADES)
ISO: 12925-1 TYPE CKD (ALL GRADES)
DAVID BROWN: S1.53.101 (ALL GRADES)
CINCINNATI MILACRON (ALL GRADES)
DIN 51517 PART 2 (ALL GRADES)
US STEEL: 224 (ALL GRADES)
HANSEN TRANSMISSIONS (ALL GRADES)
MὔLLER WEINGARTEN EQUIPMENT (ALL GRADES)
AGMA/ANSI: 250.04 (220 GRADE)
DIN 51517 PART 3 (220 GRADE)
REXNORD FALK GEARS: V, A, F, J, EP
SMS GROUP SN 180-2
In order to continue to provide superior quality, BOSS LUBRICANTS reserves the right to change composition of its products without notice.
For the location of the Distributor nearest you, please call 1-800-844-9457. BOSS LUBRICANTS #112, 6303 - 30th St SE Calgary AB T2C 1R4